white matte
Polyester film with print pretreatment for TTR printing, permanent high-quality acrylate adhesive and glassine roll carrier. These product constructions have UL approval under number MH16635. Recommended for oily surfaces.
| THERMLfilm® Advantage™ Superb | WHITE | PET-DWA2-9W09S/27 |
| THERMLfilm® Advantage™ Superb | SATIN WHITE | PET-DYA1-9W09A/27 |
| THERMLfilm® Advantage™ Superb | WHITE MATT | PET-DWC2-9W09S/27 |
| THERMLfilm® Advantage™ Superb | SATIN SILVER | PET-DUA2-9W09S/27 |
| THERMLfilm® Advantage™ Superb | SILVER MATT | PET-DSC2-9W09S/27 |
| THERMLfilm® Advantage™ Superb | TRANSPARENT | PET-DCA2-9W09S/27 |
| THERMLfilm® Advantage™ Superb | SATIN TRANSPARENT | PET-DEA2-9W09S/27 |
| THERMLfilm® Advantage™ Superb | THIN TRANSPARENT (different thickness) |
PET-BCA2-9W09S/27 |
THERMLfilm and Advantage are registered trademarks of FLEXcon
| Reference Value | Unit | Test Method | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BASE FILM PET | Thickness | 50 (25) ± 10% | Micron | ASTM D 3652 | |||||||||
| ADHESIVE | Thickness | 27 ± 3 | Micron | ASTM D 3652 | |||||||||
| Peel values: |
|
N / 25mm | FTM 1 (Modified to 72 h contact time) |
||||||||||
| Shear strength | 50 | Hrs. | FTM 8 (Dwell time 1 hr. on stainless steel with a load of 2Kg) |
||||||||||
| Initial adhesion | 720 (459) | gram/sq cm | ASTM D 2979 | ||||||||||
| CARRIER | Thickness | 56 ± 10% | Micron | ASTM D 3652 | |||||||||
| TOTAL CONSTRUCTION | Temp. Range | -40 to 150 | °C | ||||||||||
| Bonding temperature | 10 | °C | |||||||||||
Suitable for conventional printing methods (solvent, water + UV inks), as well as thermal transfer with combination and resin ribbons.
Shelf life of 2 years when stored at a maximum of 21°C and 50% relative humidity. Avoid storage in very high humidity, heat, or cold.
The expected lifespan for outdoor applications depends on the bonding surfaces, but the label material is weather-resistant for at least two years. The foil complies with REACH/SVHC and RoHS requirements – IMDS data available upon request.
*The technical data mentioned are to be regarded only as representative or typical values and should not be used for specification purposes.
Anfrage / Zentrale
Folit GmbH
Im Moldengraben 47
70806 Kornwestheim
Anfrage / Zentrale
Tel: 07154-8225-80
Inquiry / Headquarters
Folit GmbH
Im Moldengraben 47
70806 Kornwestheim
Inquiry / Headquarters
Tel: 07154-8225-80
