Note:
Due to the high destructibility of the base film, this product should be processed with a wide matrix (min. 6 mm). Labels should have rounded corners. The preferred method is rotary die-cutting. This product is not intended for use with fan-folding. Use with plasticized vinyl surfaces or removing and then re-laminating the release liner is not recommended.
| THERMfilm® PE 200 W TC-387 L-88 40GL | WHITE | PED-DW22-5909A/27 |
THERMfilm is a registered trademark of FLEXcon
| Nominal value | Unit | Test method | ||
|---|---|---|---|---|
| BASE FILM PE | Thickness | 50 ± 10% | Micron | ASTM D 3652 |
| ADHESIVE | Thickness | 27 ± 3 | Micron | ASTM D 3652 |
| Peel values: Stainless Steel Glass Acrylic |
FILM TEARS DURING ADHESION TEST | N / 25 mm | FTM 1 (Modified to 72 h contact time) | |
| Shear Strength | 100 + | Hrs. | FTM 8 (Dwell time 1 hr on stainless steel with a 2 kg load) | |
| Initial Adhesion | 870 | gram/sq cm | ASTM D 2979 | |
| LINER | Thickness | 56 ± 10% | Micron | ASTM D 3652 |
| OVERALL CONSTRUCTION | Temp. Range | -40 to 80 | °C | |
| Application Temperature | 2 | °C | ||
Suitable for conventional printing methods (solvent, water + UV inks), as well as thermal transfer with combination and resin ribbons.
2 years shelf life when stored at a maximum of 21°C and 50% relative humidity. Avoid storage in very high humidity, heat or cold.
For indoor use only. The foil complies with REACH and RoHS requirements; IMDS data available upon request.
*The technical data mentioned are to be regarded only as representative or typical values and should not be used for specification purposes.
Anfrage / Zentrale
Folit GmbH
Im Moldengraben 47
70806 Kornwestheim
Anfrage / Zentrale
Tel: 07154-8225-80
Inquiry / Headquarters
Folit GmbH
Im Moldengraben 47
70806 Kornwestheim
Inquiry / Headquarters
Tel: 07154-8225-80
