Typical Value Unit Test Method BASE FILM PET Thickness 50 ± 10% Micron ASTM D 3652 ADHESIVE Thickness 22 ± 3 Micron ASTM D 3652 Peel values: Stainless steel 9 Glass 7 Acrylic 10 N / 25 mm FTM 1 (Modified to 72 h contact time) Shear strength 1 hr. FTM 8 (Dwell time 1 hr. on stainless steel with a load of 2 kg) Initial adhesion 340 gram/sq cm ASTM D 2979 LINER Thickness 56 ± 10% Micron ASTM D 3652 OVERALL CONSTRUCTION Temp. Range -40 to 150 °C Re-removable adhesive properties must be checked in the final application. Application temperature 10 °C

Home » Shop » ThermlFilm® PM 200 W TC-716 V-58 40W GL-9

ThermlFilm® PM 200 W TC-716 V-58 40W GL-9 - Image 2

Flexcon

Special Foils

ThermlFilm® PM 200 W TC-716 V-58 40W GL-9

glossy white

Product Description

50µ thick white polyester film with print pretreatment for conventional & thermal transfer printing. Removable acrylate adhesive and glassine carrier for roll stock.

Note: This removable adhesive removes cleanly from most surfaces, however application environments such as exposed high temperature conditions and certain surfaces such as vinyl, styrene, painted wood, polycarbonate can lead to increased adhesion and adhesive transfer. Re-removable adhesive properties must be checked in the final application.

THERMLfilm^® PM 200 W TC-716 40W GL-9

WHITE

PET-DW79-6609S/22

THERMLfilm is a registered trademark of FLEXcon

Physical properties

		Typical Value	Unit	Test Method
BASE FILM PET	Thickness	50 ± 10%	Micron	ASTM D 3652
ADHESIVE	Thickness	22 ± 3	Micron	ASTM D 3652
	Peel values:	Stainless steel 9 Glass 7 Acrylic 10	N / 25 mm	FTM 1 (Modified to 72 h contact time)
	Shear strength	1	hr.	FTM 8 (Dwell time 1 hr. on stainless steel with a load of 2 kg)
	Initial adhesion	340	gram/sq cm	ASTM D 2979
LINER	Thickness	56 ± 10%	Micron	ASTM D 3652
OVERALL CONSTRUCTION	Temp. Range	-40 to 150	°C	Re-removable adhesive properties must be checked in the final application.
OVERALL CONSTRUCTION	Application temperature	10	°C

Printability

Suitable for conventional printing methods (solvent, water + UV inks), as well as thermal transfer with combination and resin ribbons.

Storage

2 years shelf life when stored at a maximum of 21°C and 50% relative humidity. Avoid storage in very high humidity, heat or cold.

Additional information

The expected lifespan for outdoor applications depends on the bonding surfaces; however, the label material is weather-resistant for at least two years. The foil complies with REACH and RoHS requirements; IMDS data is available upon request.

*The technical data mentioned are to be regarded only as representative or typical values and should not be used for specification purposes.