Typical Value Unit Test Method BASE FILM PET Thickness 50 ± 10% Micron ASTM D 3652 ADHESIVE Thickness 22 ± 3 Micron ASTM D 3652 Peel values: Stainless steel 18 Glass 19 Polypropylene 17 Acrylic 20 N / 25 mm FTM 1 (Modified to 72 h contact time) Shear Strength 50 Hrs. FTM 8 (Dwell time 1 hr on stainless steel with a 2 kg load) Initial Tack 540 gram/sq cm ASTM D 2979 LINER Thickness 56 ± 10% Micron ASTM D 3652 TOTAL CONSTRUCTION Temp. Range -40 to 150 °C Application Temperature 2 °C

Home » Shop » ThermlFilm® Select® 22944E

Flexcon

Universal Foils

ThermlFilm® Select® 22944E

silver matt

Product Description

Silver-matte metallized polyester film with a print pretreatment for TTR printing, permanent acrylate adhesive and glassine roll carrier.

This product construction has UL approval under number MH16635 and CSA No. 099214 L 000.

THERMLfilm® SELECT 22944E

SILVER

PET-DT23-1609A/22

THERMLfilm is a registered trademark of FLEXcon.

Physical properties

		Typical Value	Unit	Test Method
BASE FILM PET	Thickness	50 ± 10%	Micron	ASTM D 3652
ADHESIVE	Thickness	22 ± 3	Micron	ASTM D 3652
	Peel values:	Stainless steel 18 Glass 19 Polypropylene 17 Acrylic 20	N / 25 mm	FTM 1 (Modified to 72 h contact time)
	Shear Strength	50	Hrs.	FTM 8 (Dwell time 1 hr on stainless steel with a 2 kg load)
	Initial Tack	540	gram/sq cm	ASTM D 2979
LINER	Thickness	56 ± 10%	Micron	ASTM D 3652
TOTAL CONSTRUCTION	Temp. Range	-40 to 150	°C
TOTAL CONSTRUCTION	Application Temperature	2	°C

Printability

Suitable for conventional printing methods (solvent, water + UV inks), as well as thermal transfer with combination and resin ribbons.

Storage

2 years shelf life when stored at a maximum of 21°C and 50% relative humidity. Avoid storage in very high humidity, heat or cold.

Additional information

The expected lifespan for outdoor applications depends on the bonding surfaces; however, the label material is weather-resistant for at least two years. The foil complies with REACH and RoHS requirements; IMDS data is available upon request.

*The technical data mentioned are to be regarded as representative or typical values only and should not be used for specification purposes.